document number: 93175 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 04-aug-08 1 fast recovery diodes (hockey puk version), 430 a sd403c..c series vishay high power products features ? high power fast recovery diode series ? 1.0 to 1.5 s recovery time ? high voltage ratings up to 1600 v ? high current capability ? optimized turn-on and turn-off characteristics ? low forward recovery ? fast and soft reverse recovery ? press puk encapsulation ? case style conform to jedec do-200aa ? maximum junction temperature 125 c ? lead (pb)-free typical applications ? snubber diode for gto ? high voltage freewheeling diode ? fast recovery rectifier applications product summary i f(av) 430 a do-200aa rohs compliant major ratings and characteristics parameter test conditions values units i f(av) 430 a t hs 55 c i f(rms) 675 a t hs 25 c i fsm 50 hz 6180 a 60 hz 6470 i 2 t 50 hz 191 ka 2 s 60 hz 175 v rrm range 400 to 1600 v t rr 1.0 to 1.5 s t j 25 c t j - 40 to 125
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93175 2 revision: 04-aug-08 sd403c..c series vishay high power products fast recovery diodes (hockey puk version), 430 a electrical specifications voltage ratings type number voltage code v rrm , maximum repetitive peak and off-state voltage v v rsm , maximum non-repetitive peak voltage v i rrm maximum at t j = 125 c ma sd403c..s10c 04 400 500 35 08 800 900 10 1000 1100 sd403c..s15c 12 1200 1300 14 1400 1500 16 1600 1700 forward conduction parameter symbol test conditions values units maximum average forward current at heatsink temperature i f(av) 180 conduction, half sine wave double side (single side) cooled 430 (210) a 55 (75) c maximum rms current i f(rms) 25 c heatsink temperature double side cooled 675 a maximum peak, one-cycle , non-repetitive forward current i fsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 6180 t = 8.3 ms 6470 t = 10 ms 100 % v rrm reapplied 5200 t = 8.3 ms 5445 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 191 ka 2 s t = 8.3 ms 175 t = 10 ms 100 % v rrm reapplied 135 t = 8.3 ms 123 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 1910 ka 2 s low level value of threshold voltage v f(to)1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 1.00 v high level value of threshold voltage v f(to)2 (i > x i f(av) ), t j = t j maximum 1.20 low level of forward slope resistance r f1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.56 m high level of forward slope resistance r f2 (i > x i f(av) ), t j = t j maximum 0.70 maximum forward voltage drop v fm i pk = 1350 a, t j = 25 c; t p = 10 ms sinusoidal wave 1.83 v recovery characteristics code maximum value at t j = 25 c test conditions typical values at t j = 125 c t rr at 25 % i rrm (s) i pk square pulse (a) di/dt (a/s) v r (v) t rr at 25 % i rrm (s) q rr (c) i rr (a) s10 1.0 750 25 - 30 2.4 52 33 s15 1.5 2.9 90 44 i fm t rr dir dt i rm(rec) q rr t
document number: 93175 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 04-aug-08 3 sd403c..c series fast recovery diodes (hockey puk version), 430 a vishay high power products note ? the table above shows the increment of thermal resistance r thj-hs when devices operate at diffe rent conduction angles than dc thermal and mechanical specifications parameter symbol test conditions values units maximum operating temperature range t j - 40 to 125 c maximum storage temperature range t stg - 40 to 150 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.16 k/w dc operation double side cooled 0.08 mounting force, 10 % 4900 (500) n (kg) approximate weight 70 g case style see dimensions - link at the end of datasheet do-200aa r thj-hs conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.010 0.011 0.008 0.008 t j = t j maximum k/w 120 0.012 0.013 0.013 0.013 90 0.016 0.016 0.018 0.018 60 0.024 0.024 0.025 0.025 30 0.042 0.042 0.042 0.042
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93175 4 revision: 04-aug-08 sd403c..c series vishay high power products fast recovery diodes (hockey puk version), 430 a fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - forward power loss characteristics fig. 6 - forward power loss characteristics 70 80 90 100 110 120 130 0 50 100 150 200 250 30 60 90 120 180 average forward current (a) maxim um allowable heatsink temperature (c ) conduction angle sd 403c ..c series (single side c oo le d) r (d c ) = 0.16 k/w thj- hs 50 60 70 80 90 100 110 120 130 0 50 100 150 200 250 300 350 30 60 90 180 dc 120 average forward current (a) maximum allowable heatsink temperature (c) conduction period sd 403c ..c se rie s (sin gle side c oo led) r ( d c ) = 0 .1 6 k /w thj-h s 50 60 70 80 90 100 110 120 130 0 50 100 150 200 250 300 350 400 450 30 60 90 120 180 average forward current (a) maximum allowable heatsink temperature (c) conduction angle sd403c..c series (doub le side cooled) r (d c ) = 0.08 k /w th j-hs 40 50 60 70 80 90 100 110 120 130 0 100 200 300 400 500 600 700 30 60 90 180 dc 120 average forward current (a) maximum allow able heatsink temperature (c) conduction period sd 4 03c ..c se rie s (d ouble side co ole d) r (d c ) = 0.08 k/w thj-h s 0 100 200 300 400 500 600 700 800 0 50 100 150 200 250 300 350 400 450 180 120 90 60 30 rm s limit conduction angle maxim um average forw ard pow er loss (w) average forward current (a) sd403c..c series t = 125c j 0 100 200 300 400 500 600 700 800 900 1000 1100 0 100 20 0 3 00 40 0 500 600 7 00 dc 180 120 90 60 30 rm s lim it conduction period maximum average forward power loss (w) average forw ard current (a) sd 403c ..c series t = 125c j
document number: 93175 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 04-aug-08 5 sd403c..c series fast recovery diodes (hockey puk version), 430 a vishay high power products fig. 7 - maximum non- repetitive surge current single and double side cooled fig. 8 - maximum non- repetitive surge current single and double side cooled fig. 9 - forward voltage drop characteristics fig. 10 - thermal impedance z thj-hs characteristics fig. 11 - recovery time characteristics fig. 12 - recovery charge characteristics 2000 2500 3000 3500 4000 4500 5000 5500 6000 0 0 1 0 1 1 num ber of equal amplitude half cycle current pulses (n) peak half sine w ave forw ard current (a) in it ia l t = 1 2 5 c @ 60 hz 0.0 083 s @ 50 hz 0.0 100 s j at any rated load condition and with r a t e d v a p p li e d f o ll o w in g s u rg e . rr m sd403c..c series 1000 2000 3000 4000 5000 6000 7000 1 1 . 0 1 0 . 0 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. maximum non repetitive surge current initial t = 125c no voltage reapplied rated v reapplied rr m j sd 403c ..c series 10 100 1000 10000 01234567 ins tan ta ne ou s fo rw ard c urr ent (a) instanta neo us forw ard vo lta ge (v) t = 25 c j t = 125 c j sd403c..c serie s 0.001 0.01 0.1 1 0.001 0.01 0.1 1 10 100 s q ua re w a ve p ulse d ura tion (s) thj-hs transient therm al im pedan ce z (k/w) steady state value r = 0 .1 6 k /w (single side c oo le d) r = 0 .0 8 k /w (double side cooled) (d c ope ratio n) thj-hs thj- hs sd 403 c..c s eries 1.6 1.8 2 2.2 2.4 2.6 2.8 0 0 1 0 1 rate of fall of forward current - di/dt (a/s) maximum reverse recovery time - trr (s) 200 a i = 750 a squa re pulse 400 a fm sd 4 03c..s10c se ries t = 125 c ; v = 30v r j 10 20 30 40 50 60 70 80 90 10 0 11 0 12 0 13 0 14 0 0 20406080100 maximum reverse recovery charge - qrr (c) rate of fa ll of forward current - di/dt (a/s) 200 a 400 a i = 7 50 a squa re pulse fm sd 40 3c ..s10 c se rie s t = 125 c ; v = 3 0v r j
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93175 6 revision: 04-aug-08 sd403c..c series vishay high power products fast recovery diodes (hockey puk version), 430 a fig. 13 - recovery current characteristics fig. 14 - recovery time characteristics fig. 15 - recovery charge characteristics fig. 16 - recovery current characteristics fig. 17 - maximum total energy loss per pulse characteristics 10 20 30 40 50 60 70 80 90 10 20 30 40 50 60 70 80 90 100 maximum reverse recovery current - irr (a) rate of fall of forward current - di/dt (a/s) 200 a 400 a i = 750 a s q ua re p u ls e fm sd403c..s10c series t = 125 c; v = 30v r j 1.5 2 2.5 3 3.5 0 0 1 0 1 rate of fall of forward current - di/dt (a/s) maximum reverse recovery time - trr (s) 200 a i = 750 a sq uare pulse 400 a fm sd 403c ..s1 5c serie s t = 125 c ; v = 30v r j 50 60 70 80 90 100 110 120 130 140 150 160 170 0 20406080100 m a xim um re verse re co very c ha rg e - q rr (c ) rate of fall of forward current - di/dt (a/s) 200 a i = 75 0 a sq ua re p uls e 400 a fm sd 403c..s15c se rie s t = 12 5 c ; v = 30v r j 10 20 30 40 50 60 70 80 90 100 110 120 130 1 0 20 3 0 40 5 0 60 70 80 9 0 10 0 maximum reverse recovery current - irr (a) rate o f fa ll of forward current - di/dt (a/s) 200 a i = 750 a s q u a re p u ls e fm 400 a sd403c..s15c series t = 12 5 c ; v = 30v r j 1e 1 1e 2 1e 3 1e 4 1e 1 1 e2 1e3 1e 4 1 2 0.1 pulse basew idth (s) p e a k f o rw a rd c u rre n t (a ) 4 dv/dt = 1000v/s sinu soidal pulse 20 jou le s p e r p ulse 10 0.4 0.2 0.04 t = 125c , v = 800v j rrm 0.02 0.01 sd403c ..s10c s eries tp 1e11e21e31e4 1 2 0.1 pulse basew idth (s) 4 20 joule s p er pulse 10 0.4 0.2 0.04 t = 1 25c, v = 800v trapezoidal pulse dv/dt = 1000v/s; di/dt=50a/s sd403c..s10c series j rrm tp
document number: 93175 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 04-aug-08 7 sd403c..c series fast recovery diodes (hockey puk version), 430 a vishay high power products fig. 18 - maximum total energy per pulse characteristics ordering information table 1e1 1e2 1e3 1e4 1e1 1e2 1e3 1e4 1 2 0.1 pulse ba se w id th (s) peak forward current (a) 4 dv/dt = 1000v/s si nu soidal pu ls e 20 joules per pulse 10 0.4 0.2 0.04 0.02 sd403. .s15c series t = 125c , v = 1120v j rrm tp 1e1 1e2 1e3 1e4 1 2 0.1 pulse basew idth (s) 4 20 joules per pulse 10 0.4 0.2 trapezoid al pulse dv/dt = 1000v/s; di/dt=50a/s sd403c..s15c series t = 125c, v = 1120v j rr m tp 1 - diode 2 - essential part number 3 - 3 = fast recovery 4 - c = ceramic puk 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 -t rr code (see recovery characteristics table) 7 - c = puk case do-200aa device code 5 13 24 67 sd 40 3 c 16 s15 c links to related documents dimensions http://www.vishay.com/doc?95248
document number: 95248 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 06-nov-07 1 do-200aa outline dimensions vishay semiconductors dimensions in millimeters (inches) 0.3 (0.01) min. both ends 42 (1.65) dia. max. 38 (1.50) dia. max. 3.5 (0.14) 0.1 (0.004) dia. nom. x 1.8 (0.07) deep min. both ends 19 (0.75) dia. max. 2 places 14.4 (0.57) 13.7 (0.54) quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specifications)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
